If your Refurbished Mac has problems with the settings stored in PRAM, it may help to reset it.
PRAM is a small portion of memory that the Mac uses to store certain settings so it can access them quickly.
Settings that can be stored in PRAM include: sound volume, display resolution, startup disk selection, time zone and information about recent kernel panics. The settings stored in PRAM vary depending on the Mac you use and the devices you connect to the Mac.
If you have problems with these or other settings, it may help to reset it.
For example, if the Mac starts up from a disk other than the one selected in Startup Disk preferences, or if a question mark icon briefly appears before the Mac starts up, you may need to reset PRAM.
How to reset PRAM







Shut down the Mac, then turn it back on and immediately press and hold these four keys together: ALT, CMD, P and R. You can release the keys after about 20 seconds, during which the Mac may appear to restart several times.
You can release the keys after the second startup chime of the Refurbished Mac.
If this has fixed your problem for good, you don't need to do anything else, but otherwise you may need to Reset the SMC.
The system management controller, or SMC, is the chip soldered onto the logic board of every Mac that controls things like the LEDs, fans, keyboards and other connected peripherals, as well as the power buttons. It also handles part of disk management, power consumption control and sleep.
When should you reset the SMC?
When the SMC starts behaving abnormally, several curious things can happen on the Mac, including:
-
- The battery, charger or battery lights do their own thing
- The Mac doesn't turn on when you lift the screen
- The keyboard backlight doesn't come on
- The trackpad doesn't work or works incorrectly
- The fans run at high speed for no reason
- The Mac doesn't connect to WiFi or refuses to turn on
- There are problems with Target Mode
- Icons bounce endlessly in the Dock when opened
- Slowdowns occur while using or shutting down the Mac
How to reset correctly
If you own a MacBook :
-
- Shut down the computer
- Connect the charger
- Press SHIFT (left) + Control + Alt + power button at the same time
- Release only the power button after 5 seconds
- After another 5 seconds release the other 3 keys too
- Turn the computer back on
For Mac Pro, iMac, Mac mini instead :
-
- Shut down the Mac
- Unplug the power
- Wait 15 seconds
- Plug the power back in and start up
If even this doesn't solve your problems, then there is something more serious wrong; it could be a software problem (so always fixable) or a hardware fault. In that case you should contact whoever sold you the product (if still under warranty) or go directly to an Apple Store



